2T Tonne Scissor Jack Lift Wind up for Car Van Garage W/Crank Speed Handle

Features:

Main function is for lifting vehicles or motorcycle and repair them.
Easy to operate using with speed handle.
Large base and saddle helps provide stability
Easy to use and to operate at affordable prices
Compact size for storage.
Ergonomic design for comfortable handling.
BEFORE USE:
1. Do not use blocks on or under the jack.
2. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
3. Inspect the jack immediately if the lift is believed to have been subjected to an abnormal load or shock.
4. If the jack is found to be damaged, it should be removed from service until properly repaired.
OPERATING INSTRUCTIONS:
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
Specifications:
Color:Black
Condition: Brand new
Minimum height: About 110mm
Maximum height: Approximately 400mm
Lifting Capacity: 2 Ton
Material: Steel
Item Size: 40*10.5*8.5 CM
Package Included:
1 x Scissor jack
1 x Handle